TL;DR
A grid bot profit calculator multiplies your net profit per grid cycle by how many cycles complete, then subtracts the loss on coins you are left holding if price exits the range. The per-cycle number is easy to estimate, and the out-of-range loss is the one most people skip.
Key Takeaways
- 1.Profit per grid is roughly the grid spacing as a percent of price, minus two trading fees.
- 2.Geometric grids use a constant ratio, so each cycle earns about the same percent at every level.
- 3.More grids means smaller profit per cycle but more cycles, and fees can erase thin spacing.
- 4.The biggest risk is price leaving your range, which leaves you holding coins at a loss.
- 5.Treat any projected daily or annual return as a ceiling, not a forecast.
To estimate grid bot profit, take your upper price minus your lower price, divide by the number of grids, express that spacing as a percent of price, subtract two trading fees, and multiply by the capital per grid and the number of cycles. The result is a ceiling that ignores losses if price leaves your range.
Grid bots on exchanges and platforms such as 3Commas, Pionex and Bitget all ask for the same inputs: a lower price, an upper price, a grid count and an investment amount. The dashboard then shows a projected return that looks great. This guide walks through the math behind that number so you can check it yourself, spot where the projection is optimistic, and size a bot before you fund it. All worked examples use hypothetical prices to show the formulas.
How do you calculate grid bot profit?
Grid bot profit per cycle equals the grid spacing as a percentage of price, minus the fee paid on both the buy and the sell, multiplied by the order size. A cycle is one buy at a lower grid line and one sell at the next line up.
Here is the full chain. Spacing is (upper minus lower) divided by grid count for an arithmetic grid. Percent per grid is spacing divided by the price at that level. Net percent per cycle is that figure minus two times your fee rate. Order size is your investment divided by grid count. Profit per cycle is order size times net percent.
| Input | Hypothetical value | Result |
|---|---|---|
| Lower and upper price | $2,000 to $3,000 | $1,000 range |
| Grid count | 50 | $20 spacing |
| Investment | $5,000 | $100 per grid |
| Spacing at $2,500 | $20 / $2,500 | 0.80% per grid |
| Fee per side | 0.10% | 0.20% round trip |
| Net per cycle | 0.80% minus 0.20% | 0.60%, or $0.60 on $100 |
In that example one completed cycle earns $0.60 on a $100 order. That sounds tiny, which is why grid profit depends on volume of cycles, not on any single trade.
One detail trips people up: profit per cycle is paid in the quote currency, but the bot holds the base coin between cycles. A bot can show a rising realized profit while the total account value falls, because the coins it holds are marked down. Always compare realized grid profit against the change in the value of the held coins, and judge the bot on total value, not on the profit counter alone.
The core formula for grid bot profit is net percent per cycle, spacing divided by price minus two fees, multiplied by order size and cycle count.
Arithmetic or geometric: which grid spacing earns more?
Geometric grids earn a steady percent per cycle at every price level, while arithmetic grids earn more percent at the bottom of the range than at the top. Neither is universally better; geometric spacing suits wide ranges and arithmetic suits narrow ones.
Take the same $2,000 to $3,000 range with 50 grids. On an arithmetic grid the $20 spacing is 1.00% of price at $2,000 but only 0.67% at $3,000. On a geometric grid the ratio is 1.5 raised to the power of 1/50, about 1.00814, so every level earns roughly 0.81% before fees. After the 0.20% round trip fee, that is about 0.61% net at every line.
Pros
- Geometric: same percent profit at every level
- Geometric: better for wide ranges and volatile pairs
- Arithmetic: simple to reason about in dollars
- Arithmetic: earns more percent per cycle near the lower bound
Cons
- Geometric: dollar spacing widens as price rises
- Arithmetic: top-of-range cycles earn thinner percent returns
- Both: net profit shrinks quickly as fees rise
- Both: neither protects you from a range breakout
On a 50-grid, $2,000 to $3,000 range, geometric spacing yields about 0.81% gross per cycle at every line, versus 1.00% at the bottom and 0.67% at the top for arithmetic.
How many grids should you use?
Use enough grids that spacing stays comfortably above twice your fee rate, typically at least 3 to 4 times it. With a 0.10% fee per side, spacing below about 0.4% leaves almost nothing after costs, so a tighter grid does not automatically mean more profit.
Adding grids has two effects. Each cycle earns less percent because spacing narrows, but small price wiggles trigger more cycles. In a choppy sideways market, more grids usually win. In a market that trends slowly through your range, fewer grids with wider spacing lose less to fees and leave you less exposed to being fully loaded at the bottom.
Pick a grid count in four moves
- 1
Set your range
Choose lower and upper prices from support and resistance you can defend, such as a 30 or 60 day high and low.
- 2
Compute the minimum spacing
Take your round trip fee, 0.20% in our example, and multiply by 3 or 4. That gives a floor of 0.6% to 0.8% spacing.
- 3
Divide the range
Spread the range so each gap is at or above that floor. A $1,000 range around $2,500 at 0.8% spacing allows about 50 grids.
- 4
Check order size
Make sure investment divided by grid count clears the exchange minimum order. Too many grids on a small account produce orders the exchange rejects.
There is also a capital trade-off. Splitting $5,000 across 50 grids gives $100 orders, while 100 grids gives $50 orders. Doubling the grids halves the dollars earned per cycle, so you need more than twice as many completed cycles just to match the profit. In practice, price rarely does that, which is why very dense grids often disappoint outside of volatile ranges.
A good grid count is the highest number whose spacing is still at least three to four times your round trip fee.
What do realistic cycle counts and returns look like?
Realistic returns depend entirely on how often price crosses your lines, which you cannot know in advance. A calculator can only show scenarios, such as what 2, 4 or 8 completed cycles per day would produce at 0.60% net per cycle.
Using the hypothetical $5,000 bot with $100 orders and $0.60 net per cycle, 4 cycles per day produces $2.40, or 0.048% of capital per day. Annualized, that is about 17.5%. That figure assumes price keeps oscillating inside the range for a full year, which almost never happens. A more honest way to use the number is as a daily ceiling for a period you expect to stay range bound.
| Cycles per day | Daily profit | Daily % of $5,000 | Simple annualized |
|---|---|---|---|
| 2 | $1.20 | 0.024% | 8.8% |
| 4 | $2.40 | 0.048% | 17.5% |
| 8 | $4.80 | 0.096% | 35.0% |
| 16 | $9.60 | 0.192% | 70.1% |
Do not trust annualized grid APRs
An annualized figure multiplies a good week by 52. Real grid bots spend long stretches with price outside the range, where cycles stop and losses on held coins start.
Volatility is the engine here. A pair that moves 3% a day inside your range can cross four or five lines a day at 0.8% spacing, while a pair that moves 0.5% a day may cross none. Before you pick a range, look at the average daily high to low move over the past 30 days and divide by your spacing. That gives a rough sense of how many lines price touches, and therefore how many cycles to model.
At 0.60% net per cycle on a $5,000 hypothetical bot, even 4 cycles a day only produces about $2.40, so any large projected APR depends on constant sideways chop.
What happens to profit if price leaves the range?
If price falls below your lower bound, the bot stops trading and you hold coins bought on the way down, so unrealized loss can exceed all the cycle profit you collected. If price rises above the upper bound, the bot sells out and you simply miss further upside.
Run the downside in the same example. Suppose price starts at $2,500, the bot buys about $2,500 of starter coins, and price then falls to $2,000, the bottom of the range. The starter coins lose 20%, about $500. The 25 grid buys below the start, each around $100, lose roughly $270 combined. That is about $770 or 15% of the $5,000 investment, before cycle profits. At $2.40 per day that takes over 300 days of perfect cycling to earn back.
- Set a stop-loss below the lower bound, not at it
- Size the bot so the full-range downside is a loss you accept
- Keep spacing above 3 to 4 times your round trip fee
- Avoid pairs that trend hard in one direction
- Review the range weekly and reset if price drifts out
- Use only capital you could leave idle for months
The upside case has its own cost. If price breaks above $3,000, the bot has sold every coin and sits in cash. You earned the cycle profits, but a holder of the same $5,000 in the coin would have kept gaining. That opportunity cost is not a loss on paper, yet it is why grid bots lag buy and hold in strong uptrends.
A grid bot's worst case is price exiting the bottom of the range, where a hypothetical $5,000 bot can lose roughly 15% in a drop from $2,500 to $2,000.
How should you use a grid bot profit calculator?
Use a calculator to compare setups, not to predict income. Change one input at a time, check net percent per cycle after fees, and always run the downside case next to the upside case before you fund anything.
A practical routine is to calculate three scenarios: a base range from recent highs and lows, a tighter range with more grids, and a wider range with fewer. Compare net percent per cycle, order size and the loss if price hits the lower bound. The setup with the best ratio of ceiling profit to worst case loss is usually the sensible one, not the one with the biggest advertised APR.
Slippage and funding costs deserve a line in the model too. On spot markets slippage is small for liquid pairs, but on thin altcoins a market-style fill can cost another 0.05% to 0.10% per order, which eats directly into a 0.60% net cycle. On futures grids, funding payments add a recurring cost or credit depending on which side you hold.
Also confirm your real fee tier. Many exchanges charge around 0.10% per side on standard spot accounts, but VIP tiers, token discounts and maker rebates change that, and a difference of 0.05% per side is a 17% cut to a 0.60% net cycle. Check your own account before you trust the output.
The best use of a grid bot profit calculator is comparing downside against upside across several setups, because the setup with the best loss-to-profit ratio beats the one with the highest projected APR.
The verdict: what to do before you run a grid
Do the math first. Estimate net profit per cycle after fees, size orders above the exchange minimum, and calculate the loss at your lower bound. If the downside is more than you can stomach, narrow the investment or skip the pair.
Keep a simple log for the first month. Write down the date each cycle completes, the realized profit shown by the bot, and the value of the coins it holds at the end of each week. After four weeks you will know your real cycle rate, your real fee drag and whether the range you chose fits how the pair actually moves. That log is worth more than any projection, because it replaces assumptions with your own data.
Treat projected APR as marketing and per-cycle net percent as the real input. Start with a small amount, watch how many cycles complete in your first two weeks, and compare that to your calculator's assumption. If cycles run well below estimate, your range or grid count is wrong, not the bot.
A grid bot only pays when net profit per cycle, after two fees, is positive and price stays inside your range, so run the calculator on both of those before you fund it.
Keep reading
Get smarter trades, weekly
One short email every Sunday. AI workflows, tool reviews, and trader productivity tips.
