TL;DR

PineConnector is worth it if you already run TradingView alerts and trade forex or CFDs on MetaTrader 5, but at $59 to $199 per month for the hosted plans it is a plumbing tool, not a strategy, and it only pays off when your alerts are already profitable.

Key Takeaways

  • 1.PineConnector routes TradingView alerts to MetaTrader 5 accounts, and the 2026 plans are Core at $59/mo, Plus at $129/mo and Pro at $199/mo.
  • 2.The $7 seven-day Core trial is the cheapest way to test whether your alert syntax and broker work before committing.
  • 3.Official plan limits are 3, 10 and 25 MT5 connections, with 1, 3 and 5 hosted Edge instances.
  • 4.It is built for MT5 and works with prop firm accounts that allow Expert Advisors, but the pricing page does not mention MT4.
  • 5.It automates execution only, so a weak TradingView strategy will just lose money faster.

PineConnector is a paid bridge that takes TradingView alerts and turns them into live orders on a MetaTrader 5 account, and in 2026 it costs between $59 and $199 per month. It is a good fit for forex and CFD traders who already trust their alerts, and a poor fit for anyone still looking for an edge.

I went through the official pricing page, the plan limits and the setup flow to write this review, and I cross-checked the numbers against the vendor's own blog because third-party sites disagree with each other. Some list $39 per month, which is an outdated figure. Below you will find what each plan includes, how setup works, where the tool breaks down, and who should skip it.

What is PineConnector and how does it work?

PineConnector connects TradingView alerts to MetaTrader 5. You write an alert in TradingView that contains a short text command, TradingView sends it as a webhook, PineConnector receives it, and an Expert Advisor on your MT5 terminal opens, modifies or closes the trade. The hosted plans run that MT5 terminal on PineConnector's own Edge servers so you do not need a VPS.

The whole point is to remove the manual step between a chart signal and an order. If your strategy fires at 3 a.m. on the Asian session, the order still goes through. TradingView supplies the signal, PineConnector supplies the pipe, and your broker supplies the fill.

There are three moving parts to understand before you pay for anything.

  • A TradingView plan that supports webhook alerts, since webhooks are not available on the free tier.
  • An MT5 account with a broker that allows Expert Advisors.
  • A PineConnector license and either your own PC or VPS, or a hosted Edge instance.
  • An alert message written in PineConnector's command syntax with your license ID.

The per-trade logic lives in the alert text. You can set lot size, stop loss, take profit and order type inside the message, which means one connector can serve many strategies at once.

PineConnector turns a TradingView alert into an MT5 order with no manual step, and that single job is the entire product.

How much does PineConnector cost in 2026?

PineConnector sells three monthly plans in 2026. Core is $59 per month, Plus is $129 per month and Pro is $199 per month, with no yearly or lifetime option listed on the pricing page. The vendor's own blog says Core and Plus are launch prices that move to $69 and $149 for new subscribers later.

PlanPrice per monthMT5 connectionsHosted Edge instancesNotificationsSupport
Core$5931EmailStandard
Plus$129103Email + TelegramStandard
Pro$199255Email + TelegramPriority

There is a $7 trial for seven days on Core, which includes three connections, one hosted MT5 and unlimited alerts. After the trial it renews at $59 per month unless you cancel in the portal. The pricing page does not mention refunds, so treat the $7 trial as your only risk-free window.

Extra Edge instances are listed at $35 per month each, but they are marked as coming soon, so I would not plan around them. Watch out for conflicting numbers online as well. One blog claims Pro is for ten accounts at a different price, and another lists three tiers at $39, $79 and $159. The official page is the source of truth, and it can change, so check it the day you subscribe.

Check the price before you pay

Launch pricing on Core and Plus is scheduled to rise for new subscribers. If you plan to run this for a year, a $10 to $20 monthly increase adds $120 to $240 per year.

At $59 per month, Core costs $708 per year, so it only makes sense when your account is large enough that the fee is a small fraction of expected returns.

How do you set up PineConnector?

Setup takes about an hour if your alert syntax is simple. You buy a plan, get a license ID, connect an MT5 account, and paste a command into a TradingView alert. Most failed setups come from a wrong symbol name, because brokers add suffixes like .m or .pro to pairs.

PineConnector setup in five steps

  1. 1

    Start the $7 Core trial

    Create the account in the PineConnector portal and note your license ID. It is the string that goes at the start of every alert message.

  2. 2

    Connect your MT5 account

    On a hosted plan you enter your broker login and server in the portal. On your own machine you install the Expert Advisor and allow web requests in MT5 settings.

  3. 3

    Check your broker symbols

    Open Market Watch in MT5 and copy the exact symbol name. EURUSD at one broker can be EURUSD.r at another, and a mismatch means the order never fires.

  4. 4

    Write the TradingView alert

    Paste the command with the license ID, action, symbol and risk settings into the alert message box, and turn on the webhook URL from your portal.

  5. 5

    Test on a demo account

    Fire the alert manually, confirm the trade appears, then confirm stops and take profits are attached before touching a live balance.

The weakest point is symbol mapping. If you trade indices, metals and forex across one broker, expect to maintain a small table of names. A short spreadsheet saves a lot of debugging time later.

A clean demo test on one pair is the only reliable proof your PineConnector setup works, so run it before every new strategy goes live.

What does PineConnector do well?

It does one job and the job is reliable enough that many prop firm traders use it. The official page lists support for MT5 brokers and prop firms including Pepperstone, Exness, FTMO and FundedNext, with the simple rule that if your MT5 account allows Expert Advisors, it works.

Pros

  • Clear flat monthly pricing with a $7 seven-day trial.
  • Hosted Edge instances remove the need for a separate VPS.
  • Command syntax controls lot size, stop loss and take profit inside the alert.
  • Works with prop firm MT5 accounts that allow Expert Advisors.
  • Telegram notifications on Plus and Pro.

Cons

  • MT5 only according to the pricing page, with no mention of MT4.
  • $59 per month is steep for a single small account.
  • No refund policy is stated on the pricing page.
  • Extra Edge instances are still marked as coming soon.
  • Execution depends on your broker, your alert syntax and TradingView uptime.

The command-based design is its strongest feature. Because everything is in the alert text, you can change risk from 0.5% to 1% by editing a message instead of redeploying code. For traders who live in TradingView, that is a real time saver.

Hosted Edge is the other draw. Running an MT5 terminal on a home PC means power cuts and Windows updates can cause missed trades, so moving that terminal to a managed server removes a common failure point for the $59 entry price.

PineConnector's main strength is that a single alert message can carry entry, stop and take profit, so strategy changes need no code at all.

Where does PineConnector fall short?

The first limit is scope. It supports TradingView alerts routed to MetaTrader 5, and the pricing page does not mention MetaTrader 4. If your broker only offers MT4, or you trade US stocks and futures, you need a different bridge. Our crypto bot coverage, like the 3Commas and WunderTrading reviews, is a better starting point for exchange trading.

The second limit is that it adds a chain of dependencies. TradingView has to fire the alert, the webhook has to arrive, the EA has to be online, and your broker has to fill. A fault in any link costs you a trade. Slippage and spreads also still belong to your broker, so a scalping strategy that looks good on a chart can bleed on a wide-spread account.

Cost is the third. At $59 per month the fee is $708 per year. On a $1,000 account that is 70.8% of the balance, which is why small accounts should look at cheaper alternatives or manual execution. On a $25,000 funded account it is 2.8%, which is far easier to justify.

Fee as a share of account size

Annual Core cost is $708. On $1,000 that is 70.8%. On $10,000 it is 7.1%. On $50,000 it is 1.4%.

Automation also removes the pause that stops many traders from taking a bad trade. If your alerts are not profitable on a long sample, this tool will execute them without hesitation.

On a $1,000 account the $708 yearly Core fee equals 70.8% of the balance, so PineConnector only makes sense once the account is large enough to absorb it.

Who should use PineConnector and who should skip it?

The best match is a forex or CFD trader with a tested TradingView strategy, an MT5 broker, and an account above roughly $10,000. Prop firm traders running an evaluation on MT5 also fit, because consistent rule-following execution matters more than speed.

Skip it if you are still testing ideas, if you hold positions for weeks, or if you rely on discretionary entries. Manual execution costs nothing and works fine for a few trades a week. Also skip it if your market is crypto, stocks or futures, since the product is built around MT5.

Trader typeGood fit?Reason
Prop firm MT5 trader with tested alertsYesRule-based execution and Edge hosting reduce missed entries
Forex swing trader on a $25,000 accountYesFee is under 3% of balance per year
Beginner with a $500 accountNoFee is larger than any reasonable return
Crypto bot userNoBuilt for MetaTrader 5, not exchanges
Discretionary day traderNoFew automated signals to route

Charting is where this workflow starts, because every PineConnector order begins as a TradingView alert.

Charting with TradingView?

The workflows in this guide run on TradingView charts and alerts. New users get a $15 credit toward any paid plan through our partner link.

Try TradingView Free

PineConnector is best used by traders with an account large enough that $59 to $199 per month is a rounding error against their position sizes.

The verdict

PineConnector earns a recommendation for one specific trader: someone who already has a tested TradingView strategy, trades MT5 forex or CFDs, and wants hands-off execution without managing a VPS. For that person, Core at $59 per month is fair, and the $7 trial lets you prove the setup before you commit.

For everyone else it is an expensive way to automate a decision you have not validated. Spend the first month on a demo account, confirm your alerts produce a positive expectancy over at least 100 trades, and only then add the connector. Plus at $129 per month is worth it when you run several accounts, while Pro at $199 per month fits small prop firm portfolios using up to 25 connections.

My rule is simple: if you cannot explain your edge in one sentence, do not pay to automate it. If you can, PineConnector removes the last manual step. Check the pricing page before buying, since launch rates on Core and Plus are due to rise.

In 2026, PineConnector is a reliable $59 per month bridge from TradingView alerts to MT5, and it is worth paying for only after your strategy has proven itself on a demo account.

Get smarter trades, weekly

One short email every Sunday. AI workflows, tool reviews, and trader productivity tips.